3M 6204, Руководство пользователя

Страница: 138 / 144

1 2 3 4 5 6 7 8 9
Appendix B Appendix B Appendix B Appendix B – – – – Error Handling Error Handling Error Handling Error Handling
126
126 126
126
3M Toll RFID Reader 6204
3M Toll RFID Reader 6204 3M Toll RFID Reader 6204
3M Toll RFID Reader 6204 User’s Guide
User’s Guide User’s Guide
User’s Guide
Major Major Major Major Error Error Error Error Event Event Event Event Description Description Description Description Corrective Action Corrective Action Corrective Action Corrective Action
MDM_RF_VOLTAGE_
FAULT event.error.hw RF subsystem voltage
below acceptable level.
(May be seen when unit
powered off.) Verify correct operational voltage is
being supplied to reader. Verify power
supply voltages meet 3M specifications.
If condition persists, contact 3M support.
MDM_RX_TRAIN_
TIMEOUT event.error.sw The modem has exceeded
the receiver training time
limit. If condition persists, contact 3M support.
MDM_UNKNOWN_
PROTOCOL event.error.sw The modem detected an
unsupported protocol. If condition persists, contact 3M support.
MDM_UNKNOWN_
TX_INTERP_RATE event.error.sw The modem detected an
unsupported transmit
interpolation rate. Contact 3M support.
MDM_UNKNOWN_
TX_TEST_MODE event.error.sw The modem detected an
unsupported transmit test
mode. Contact 3M support.
MDM_UNKNOWN_TX
_WAVEFORM_TYPE event.error.sw The modem detected an
unsupported transmit
waveform. Contact 3M support.
SPARSE_ARRAY_
BOUNDS_CHECK event.error.sw Software attempted to
index beyong the limits of
the sparse array. Contact 3M support.
SYSLOG_INVALID_
LOG_LEVEL event.error.sw Invalid level specified in C2
command for remote
syslog. Verify the correct logging level of syslog
messages sent to the specified remote
syslog file server. If condition persists,
contact 3M support.
MDM_SYNC_NO_SIG
NAL_DETECTED event.error.hw Unable to detect
synchronization signal. Verify synchronization cables are
appropriately connected and a device
(GPS or other reader) exists which is
generating a sync signal.