-19-
Error
Cause
Remedy
Error message: Pressure sensor
Calibration parameters:
Offset and/or reinforcement incorrect
In the Service Menu:
1. Check calibration parameters, and (if neces-
sary) recalibrate
2. Contact 3M Purification Customer Service
Pressure sensor not operating correctly
Contact 3M Purification Customer Service
Defective pressure measurement
Pressure sensor not operating correctly
Contact 3M Purification Customer Service
Calibration parameters:
Offset and/or reinforcement incorrect
In the Service Menu:
1. Check calibration parameters and (if neces-
sary) recalibrate
2. Contact 3M Purification Customer Service
Filter test does not start
Empty test program selected
Select a test program with valid test
parameters
Test parameters are invalid
Recharge batteries (see Manual). Re-enter test
parameters.
Pressure is outside of tolerance
Check test pressure
Test programs and documentation data are
invalid, due to defective buffer battery
Contact 3M Purification Customer Service
Time/date is incorrect
Time/date is not valid, due to empty buffer
battery
Recharge battery (see Manual) and readjust
time and date in the Service Menu
Integrity Device does not switch on
Battery pack is empty
Charge battery pack
Battery pack is not operating correctly
Replace battery pack
Fuse is not operating correctly
Contact 3M Purification Customer Service
Red charging LED does not blink when charg-
ing battery pack
Defective power adapter
Replace power adapter
Fuse is not operating correctly
Red charging LED is blinking rapidly
Charging function was aborted
Remove charging plug and insert again
No access to the Service Menu
Wrong security code entered
Enter correct security code. Ask your service
technician.
12.- Setting Up BlueTooth Connection
To be able to print via Bluetooth, a wireless link between the 3M™ 101 Series Integrity Test Device and the Bluetooth printer needs to be
established. Using the BLUETOOTH function in the submenu of the Service function of the 3M 101 Series Integrity Test Device allow setting up
and save the printer BLUETOOTH code. The Bluetooth connection requires that the printer is located in close proximity (a few meters) to the
filter test device.
Note:
Strong radio signals or other Bluetooth transmitters can interfere with setting up the connection between devices. Therefore, it is best to
disable Bluetooth devices with the immediate area that could interfere with the connection
