3e Technologies International AirGuard 3e-525C-2 Скачать руководство пользователя страница 9

Страница: 9 / 80

3e–525C–2 Wireless Access Point

Chapter 1: Introduction

29000155-001 A

Chapter 1: Introduction

This manual covers the installation and operation of the 3e Technolo-

gies International’s 3e–525C–2 Wireless Access Point. The 3e–525C–2 is a

ruggedized access point/bridge which is intended for use in industrial

and external environments. It accommodates 802.11a/b/g, 802.11g Super,

and 802.11a Turbo WLAN access and uses Power over Ethernet (PoE) ac-

cess to the Ethernet WAN to eliminate the need for internal access point

power supply units (AC-DC converters) and 110-220V cabling installa-

tions. The wireless LANs can include mobile devices such as handheld

Personal Data Assistants (PDAs), mobile web pads, and wireless laptops.

If encryption is desired for the WLAN, you can select None, Static

WEP, or WPA. WPA uses TKIP or AES-CCMP so you can employ legacy

client WEP cards and still secure the wireless band.

The 3e–525C–2 incorporates Power over Ethernet. The PoE interface

on the 3e–525C–2 is compatible with commercial vendor “injected power”

hub units.

The 3e–525C–2 includes AES cryptographic modules for wireless

encryption and HTTPS/TLS, for secure web communication. In addi-

tion, it contains the capability to use the traditional WEP algorithm, either

as static WEP or managed under WPA. The 3e–525C–2 has an Ethernet

WAN interface for communication to the wired LAN backbone, Ethernet

LAN local port for purposes of initial setup and configuration, and two

wireless AP antennas for communicating on the 802.11a/b/g frequen-

cies. Further, it has the capability for use of an external (remote) antenna,

for bridging, using the 802.11b/g Mixed, 802.11a, 802.11g Super, 802.11a

Turbo frequencies.

Содержание AirGuard 3e-525C-2

















































































Результаты поиска

Содержание AirGuard 3e-525C-2

Отзывы:

Похожие инструкции для AirGuard 3e-525C-2

Бренды по названию

Популярные бренды

3e Technologies International AirGuard 3e-525C-2, Руководство пользователя

Результаты поиска

Содержание AirGuard 3e-525C-2

Отзывы:

Похожие инструкции для AirGuard 3e-525C-2

Бренды по названию

Популярные бренды