3e Technologies International AirGuard 3e-525C-2 Скачать руководство пользователя страница 20

Страница: 20 / 80

3e–525C–2 Wireless Access Point

Chapter 2: Hardware Installation

29000155-001 A

3e–525C–2 Wireless Access Point

Chapter 2: Hardware Installation

29000155-001 A

The bridge antenna port is used when configuring the unit to be used

as a bridge. The port uses an omni-directional antenna.

The 3e–525C–2 can be mounted outdoors on a high post to achieve the

best bridge result. If mounted outdoors, the outdoor protection kit must

be used to prevent lightning damage.

To comply with FCC RF exposure compliance requirements, the

antennas used with the 3e–525C–2 must be installed with a mini-

mum separation distance of 20 cm from all persons, and must

not be co-located or operated in conjunction with any other antenna or

transmitter. Installation should be accomplished using the authorized

cables and/or connectors provided with the device or available from the

manufacturer/distributor for use with this device. Changes or modifica-

tions not expressly approved by the manufacturer or party responsible for

this FCC compliance could void the user’s authority to operate the equip-

ment.

Installation Instructions

The 3e–525C–2 is intended to be installed as part of a complete wire-

less design solution.

This manual deals only with the 3e–525C–2 device. The purpose of

this chapter is the description of the device and its identifiable parts so

that the user is sufficiently familiar to interact with the physical unit. Pre-

liminary setup information provided below is intended for information

and instruction of the wireless LAN system administration personnel.

It is intended that the user not open the unit. Any maintenance re-

quired is limited to the external enclosure surface, cable connections, and

to the management software (as described in chapter three through five)

only. A failed unit should be returned to the manufacturer for mainte-

nance.

Minimum System and Component Requirements

The 3e–525C–2 is designed to be attached to the wall at appropriate

locations. To complete the configuration, you should have at least the fol-

lowing components:

• PCs with one of the following operating systems installed: Win-

dows NT 4.0, Windows 2000 or Windows XP;

• A Wi-Fi compatible 802.11a/b/g device for each computer that

you wish to wirelessly connect to your wireless network. (For

wireless cards, 3eTI recommends that you select the 3e-110 PC

Card with 3e-010F Crypto Client software (sold separately) or

install the 3e-010F software with any compatible PC Card. (If you

will be using WEP, the 3e-010F software is not required);

• Access to at least one laptop or PC with an Ethernet card and

cable that can be used to complete the initial configuration of the

unit.

• A Web browser program (such as Microsoft Internet Explorer 5.5

Содержание AirGuard 3e-525C-2

















































































Результаты поиска

Содержание AirGuard 3e-525C-2

Отзывы:

Похожие инструкции для AirGuard 3e-525C-2

Бренды по названию

Популярные бренды

3e Technologies International AirGuard 3e-525C-2, Руководство пользователя

Результаты поиска

Содержание AirGuard 3e-525C-2

Отзывы:

Похожие инструкции для AirGuard 3e-525C-2

Бренды по названию

Популярные бренды