3DGence ONE, Руководство пользователя

Страница: 8 / 59

8 | 3DGence ONE
• touch high voltage parts,
•
place any objects on or under the heatbed in the process of printing or after finishing work,
• put containers with liquids on the device,
• leave the device unattended by an operator capable of taking necessary steps in case of a mechanical
failure,
• leave the device unattended in the proximity of children or animals.
3DGence ONE printer heats up to temperature above 250°C; the device has many elements, which make unpre-
dictable, rapid movements during printing. It is forbidden to put any objects or parts of body inside the device
when operating!
You should always:
• use only power sources with grounding (to avoid electric shocks),
• hold the cover of the plug, not the cord, when disconnecting the plug from the power source,
• disconnect the power source prior to the commencement of any repairs or maintenance,
•
ensure that the supplied voltage complies with demands stated in specification of the device,
• protect the power plug and cord from damage,
• disconnect the power plug if moving the device,
• disconnect the power plug if the device is not used for an extended period of time,
• periodically clean the nozzle to remove the external contamination (use non-combustible cleaner),
• wear protective gloves when working with the printer,
• ensure the possibility of quick reaction in case of device failure or printing error,
• each time before starting work, examine the workplace near the printer and remove all obstacles for
ensuring free movement of mechanical elements of printer,
• ensure the unrestricted access to the printer.
Heatbed and hotend can still be hot even when printing is finished. The temperature of these elements should
be checked on the display before touching (fig. 2). If the device is hot, wait 30 minutes after turning it off (e.g. to
clean, remove the printing model, replace the hotend etc.)
Fig. 2. Temperature parameters:
1. Hotend
2. Heatbed
2 1