3DGence ONE, Руководство пользователя

Страница: 6 / 59

6 | 3DGence ONE
There are many different filament materials. Consumables are usually made of substances such as: ABS, PLA, nylon with
various admixtures (e.g. tribo-filaments) nylon, elastic materials, enriched with metals, wood, chalk, carbon fiber, graphite
and many others. There are many types of materials such as changing colors, luminescent or made of plant fibers. The
use of particular material depends primarily on individual requirements and customer expectations - filaments have a
variety of properties such as esthetic, mechanical or temperature features. Any used material requires specific, precisely
defined parameters for the correct printing. For more information, see
chapter 3, section 4 . A growing choice of new 3D
printing materials makes FFF printing one of the most universal tools on the market.
3DGence ONE printer operates within the open system of consumables, which means that it is possible to use filaments
of other manufacturers as long as a given material meets the following criteria:
• the diameter of the filament should be 1.75 mm, with a tolerance of +/- 0.05mm,
• the suggested printing temperature should not exceed 265°C.
The use of 3DGence original printing materials ensures obtaining repeatable results.
3DGence shall not be held liable for any aggravation of quality of print resulting from the application of other manufactur-
ers’ filaments and consumables. The use of materials from other manufacturers is entirely at user’s risk.
3. SYMBOLS
3.1. List of symbols used in the manual
Markings and symbols used in this manual are given below. They indicate potentially hazardous situations, which could
cause damage to your printer or your health. Always follow instructions under the symbols - any negligence can result in
physical injuries or equipment damage not covered by warranty.
DANGER:
Indicates a potentially dangerous situation or procedure that could cause injury to the operator. Use safety
precautions.
WARNING:
Indicates a potentially hazardous situation or procedure, which can cause damage to the printer. Use safety
precautions.
PROTECTION:
The operation requires wearing protective gloves included in device equipment. Wear protective gloves.