3D Systems SLA 750 Series, Руководство пользователя, Страница: 72 / 101

7.7 Select Job
1. From the UI, open the Queue menu.
2. Confirm Job is at the top of the list in the Pending Job section. If job is not at the top of the list, tab and highlight job and tap
the up arrow to move to the top of the list.
3. Press the Play button
4. The printer goes through a series of checks and processes when a print is started:
• Checks material level
• Checks elevator position
• Homes the elevator, if necessary
• Moves elevator to start position
Observe the first few layers of the print to ensure that the part(s) are adhering to the print platform. You can see which layer
the machine is printing by looking at the Status Screen.
7.8 Editing a print
7.8.1 Editing Recoating Style Settings
1. Go to the Status tab (if accessing while printing), or go to queue tab (if accessing while not printing).
2. Click the info icon next to the job name
3. You will see two tabs at the top of the screen saying Overview and Recoat Style
4. Click the Recoat Style tab
5. Next you will see a drop down list which will contain all recoat regions created for that job
6. Click on the desired recoat region you want to change
• Add sweeps (only can be done on a part layer):
• Click Add Sweep
• Type in your desired blade gap and then click Set
• Type in your desired recoat velocity and then click Set
• Z Wait :
• Type in your desired Z Wait time (in seconds) and then click Set
3D Systems, Inc. 68 p/n 40-D150, Rev. C