3D Systems, Inc.
14
FACILITY REQUIREMENTS CHECKLIST
In the sections that follow, you will find all the requirements your facility must meet before your ProX 500 SLS 3D Printing System can
be installed . After your facility meets all these requirements, complete and sign the
Facility Requirements Checklist on page 15
and submit it to 3D Systems Customer Support for review .
When Customer Support receives your completed checklist, a 3D Systems representative will contact you to verify your facility’s
readiness. When the representative is confident that all facility requirements are met, he or she will schedule a trip to your site to install
the ProX 500 SLS 3D Printer and any additional SLS equipment which was ordered .
NOTE: All facility requirements must be met before 3D Systems Customer Support can schedule a trip to your facility
to install the SLS equipment .
3
ABOUT THE CHECKLIST
Each facility feature on the checklist is covered in the subsequent “requirements” sections of this guide . Each of these sections lists the
specific requirements for a facility feature and any instructions you need to meet them. In some cases, you must refer to the
ProX 500
SLS 3D Printer Facility Requirements Poster on page 33,
for example, when you lay out the room or wire electrical power . The
instructions tell you when you need to refer to this drawing .
•
After your facility meets all the requirements for a section, check off that section on the
Facility Requirements Checklist
.
•
If you have any questions regarding facility requirements, contact your 3D Systems Sales representative or 3D Systems Customer
Support .
HOW TO SUBMIT YOUR COMPLETED FACILITIES CHECKLIST
Submit your completed Facility Requirements Checklist by fax, mail, or email to one of the 3D Systems Customer Support sites below .
This notifies them that your facility is fully prepared for installation.
COMMUNICATIONS FORMAT
NORTH & SOUTH AMERICA; ASIA PACIFIC
EUROPE
Fax
+1 512-339-0634
attn: SLS Customer Support
+49 6151 357 355
attn: SLS Customer Support
3D Systems Corporation
333 Three D Systems Circle
Rock Hill, SC 29730
attn: SLS Customer Support
3D Systems GmbH
Rontgenstrasse 41
D-64291 Darmstadt, Germany
attn: SLS Customer Support
support@3dsystems .com
support@3dsystems .com
Be sure to include the date you submitted your completed checklist so installation can be scheduled as quickly as possible .
If you need to speak to a 3D Systems Customer Support representative about your facility requirements, call:
•
1 .800 .79
3
.3669 (U .S .)
•
(+49) 6151 .357-0 (Europe)
•
(+852) 29.23.50.77 (Asia Pacific)
