3D Systems, Inc.
10
ProX 500 SLS Transformer
Supplied by
: 3D Systems or customer
Installed by
: Supplier (prior to ProX 500 SLS 3D Printer installation)
A customer-supplied step-up or step-down transformer is required if the facility does not have 208 VAC, 3-phase, 50/60 Hz, 10 kVA
power .
There are two U .S . models and one E .U . model available for purchase from 3D Systems:
• US Transformers
:
•
230-250 Volt to 208VAC, 10kVA, 60Hz, 3PH (P/N 134005)
•
460-500 Volt to 208VAC, 10kVA, 60Hz, 3PH (P/N 134006)
• EU Transformer
•
385-415 Volt to 208VAC, 10kVA, 50Hz, 3PH (P/N 134007)
See
ProX 500 Transformer Requirements on page 18
for descriptions of specifications.
Dust Extractor
Supplied by
: 3D Systems or customer (P/N 134105)
Installed by
: Supplier (3D Systems or customer)
The Dust Extractor, 230VAC, 60Hz, 3PH (P/N 134105) and 400VAC, 50Hz,
3PH (P/N 134105) draws airborne powder out of the MQC System during
part breakout through a flexible vacuum duct and collects airborne powder
in the internal dust drawer for disposal . It is recommended that the Dust
Extractor be situated at the rear-right of the MQC System, but it is possible
to locate it as much as 50 meters away .
Vacuum Cleaner
Supplied by
: 3D Systems or customer (P/N 134190)
Installed by
: Supplier (3D Systems or customer)
The Nilfisk S2 Industrial Single Phase Vacuum Cleaner, 120V, 60Hz, 1Ph, is recommended
for SLS facility maintenance . It is used to clean the process station and MQC System
between prints .
Explosion-proof and international versions are also available . Contact 3D Customer Service
for purchasing options .
