3D Printing Systems UP MINI Скачать руководство пользователя страница 6

Страница: 6 / 56

UP Mini 3D Printer User Manual

1.2.2 The following classifications are used in this manual.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, may

result in serious injury.

Gloves: When performing certain maintenance procedures, the machine may be hot

and gloves are required to avoid burns.

Safety Glasses: Wear safety glasses to avoid injury to your eyes.

1.2.3 Protection

The printer must not be exposed to water or rain, or damage may occur.

Do not shut down the UP System or pull out the USB cable when loading a digital model, or the

model data may be lost.

When using the “Extrude” function, keep at least 50mm between the nozzle and the platform. If

too close, the nozzle may get blocked.

The printer is designed to work properly at an ambient temperature of between 15°C and 30°C and

humidity of between 20% and 50%; Operating outside these limits may result in low quality mod-

els.

1.2.4 Burn in test

Before shipping your printer has undergone a thorough test. You will notice in the maintenance

screen that it reports several KG’s of usage, this is normal and from testing prior to leaving the

factory.

Содержание UP MINI

























































Результаты поиска

Содержание UP MINI

Отзывы:

Похожие инструкции для UP MINI

Бренды по названию

Популярные бренды

3D Printing Systems UP MINI, Руководство пользователя

Результаты поиска

Содержание UP MINI

Отзывы:

Похожие инструкции для UP MINI

Бренды по названию

Популярные бренды