3D Printing Systems UP MINI Скачать руководство пользователя страница 21

Страница: 21 / 56

UP Mini 3D Printer User Manual

3.1.7 Setting the Platform Height

This section is probably the most import

Please read it carefully to ensure that you understand the platform height setup procedure, as it is

vital for successful 3D printing.

To print successfully, the platform should be set to start at

folded over) from the nozzle. As each printer is slightly different, this distance needs to be cal

brated before starting to print.

To work out the correct nozzle distance, please follow these steps:

Click “3D Print” and click “Maint

Windows version

In the text box, type in the height to which you want the

platform to move to, and click the “To” button. In the

above example, the platform

The UP Mini has a print height of 120 to 123mm

Check the distance between the nozzle and the platform.

If, for example, the platform appears to be about

away from the nozzle, increase the number

click the “To” button. As the platform gets closer to

nozzle start increasing the number in the text box by

0.2mm increments and click the “To” button. Repeat this

until you get to within 0.2mm of the nozzle.

way to check the distance between the nozzle and pla

form is to fold a piece of pap

it about 0.2mm thick) and use that as a spacer to gauge

the distance between the nozzle and platform.

1.) Now click “Set to Nozzle Height”.

3D Printer User Manual

Setting the Platform Height

This section is probably the most important of the entire manual and only needs to be done seldom

Please read it carefully to ensure that you understand the platform height setup procedure, as it is

successful 3D printing.

To print successfully, the platform should be set to start at a distance of 0.2mm (A piece of paper

folded over) from the nozzle. As each printer is slightly different, this distance needs to be cal

brated before starting to print.

out the correct nozzle distance, please follow these steps:

“Maintenance”, the below dialogue box will open.

MAC version

In the text box, type in the height to which you want the

platform to move to, and click the “To” button. In the

above example, the platform will move to 119.30mm.

The UP Mini has a print height of 120 to 123mm.

Note: You do not want to crash the platform into

the nozzle, so increase the height in smaller and

smaller increments as you get closer to the

nozzle. If you do crash the platform into the

nozzle, it is best to Initialis

Check the distance between the nozzle and the platform.

If, for example, the platform appears to be about 2mm

away from the nozzle, increase the number by 1mm and

As the platform gets closer to the

start increasing the number in the text box by

mm increments and click the “To” button. Repeat this

until you get to within 0.2mm of the nozzle. TIP: An easy

way to check the distance between the nozzle and plat-

form is to fold a piece of paper in two (Which will make

it about 0.2mm thick) and use that as a spacer to gauge

the distance between the nozzle and platform.

TIP:

If you find you get lifting at a later

stage, increase the platform height.

Now click “Set to Nozzle Height”.

and only needs to be done seldom.

Please read it carefully to ensure that you understand the platform height setup procedure, as it is

a distance of 0.2mm (A piece of paper

folded over) from the nozzle. As each printer is slightly different, this distance needs to be cali-

Note: You do not want to crash the platform into

the nozzle, so increase the height in smaller and

smaller increments as you get closer to the

nozzle. If you do crash the platform into the

Initialise again.

If you find you get lifting at a later

stage, increase the platform height.

Содержание UP MINI

























































Результаты поиска

Содержание UP MINI

Отзывы:

Похожие инструкции для UP MINI

Бренды по названию

Популярные бренды

3D Printing Systems UP MINI, Руководство пользователя

Результаты поиска

Содержание UP MINI

Отзывы:

Похожие инструкции для UP MINI

Бренды по названию

Популярные бренды