3D Printing Systems UP MINI Скачать руководство пользователя страница 45

Страница: 45 / 56

UP Mini 3D Printer User Manual

6.7 Spare parts

Almost all the plastic parts on the printer are printed by the U

spare parts for your printer, the files for all spare parts can be found in the C:

(x86)\UP\Example\ Spare Part

6.8 Leveling the platform

The UP Mini platform can be simply adjusted using the sof

If you are wanting to print raftless then you will need c

our web site under support.

Service Document – Mini Platform Calibration

6.8.a Software Platform Leveling Calibrat

Below is a video showing how to use the software for the UP Mini which uses the same software.

http://www.youtube.com/watch?v=1Z5KVv8o3fI

Ensure your Perfboard is clean and smooth both sides,

small piece of plastic could cause the leveling to be uneven.

Intilise the printer.

Click “3D Print” \ “ Platform Calibrate”

Click and long press the green

a high height like 135mm.

Move the nozzle / platform to each of the 9 locations on the

platform by clicking the corresponding location number (1,

2...9). Find out which one of the 9 locations that

smallest gap between the nozzle and platform. That location

is the highest point on the platform. Move the nozzle to the

highest point on the platform and make sure the gap between

the nozzle and the highest point is zero.

Click button “Set nozzle height”

Move the nozzle and platform to each of the other 8 locations

and measure the gap between one by one. Beside each of the

9 locations is a box with the numbers inside, select one of the

10 numbers (0.1, 0.2...1) can lift the platform to a corr

sponding height. Use that number when it makes the gap

between the nozzle and platform is zero.

After all of the 9 location are me

“Apply current vslue” at the bottom to apply the final nozzle

3D Printer User Manual

Almost all the plastic parts on the printer are printed by the UP printer itself. If you need to print

spare parts for your printer, the files for all spare parts can be found in the C:

Spare Parts folder.

6.8 Leveling the platform

The UP Mini platform can be simply adjusted using the software calibration or manually adjusted.

If you are wanting to print raftless then you will need carry out the manual calibration available on

Mini Platform Calibration

6.8.a Software Platform Leveling Calibration

Below is a video showing how to use the software for the UP Mini which uses the same software.

http://www.youtube.com/watch?v=1Z5KVv8o3fI

Ensure your Perfboard is clean and smooth both sides, as a

small piece of plastic could cause the leveling to be uneven.

“ Platform Calibrate”

Note

: The allowed largest calibration

distance between nozzle and platform is

1mm. Make sure all nine points are

within this limitation.

Make sure the gap between nozzle and

the highest point on the platform is

zero.

green up arrow to lift the platform to

platform to each of the 9 locations on the

the corresponding location number (1,

one of the 9 locations that has the

gap between the nozzle and platform. That location

platform. Move the nozzle to the

highest point on the platform and make sure the gap between

the nozzle and the highest point is zero.

Click button “Set nozzle height”

Move the nozzle and platform to each of the other 8 locations

tween one by one. Beside each of the

9 locations is a box with the numbers inside, select one of the

10 numbers (0.1, 0.2...1) can lift the platform to a corre-

sponding height. Use that number when it makes the gap

between the nozzle and platform is zero.

After all of the 9 location are measured and set, click the

at the bottom to apply the final nozzle

printer itself. If you need to print

spare parts for your printer, the files for all spare parts can be found in the C:\Program Files

tware calibration or manually adjusted.

arry out the manual calibration available on

Below is a video showing how to use the software for the UP Mini which uses the same software.

he allowed largest calibration

distance between nozzle and platform is

Make sure all nine points are

n this limitation.

Make sure the gap between nozzle and

the highest point on the platform is

Содержание UP MINI

























































Результаты поиска

Содержание UP MINI

Отзывы:

Похожие инструкции для UP MINI

Бренды по названию

Популярные бренды

3D Printing Systems UP MINI, Руководство пользователя

Результаты поиска

Содержание UP MINI

Отзывы:

Похожие инструкции для UP MINI

Бренды по названию

Популярные бренды