PRESS PAUSE
TO CONTINUE
The modeler is paused.
Press
to continue or
to cancel.
PAUSE
ABORT
CYCLE POWER
TO CONTINUE
A severe error occurred. The modeler cannot recover from it
and must be switched off.
Cycle power to the modeler. If the error message
occurs again, contact your
Hotline.
DONE REMOVE
BUILD
The modeler completed building the current job.
platform.
HOMING
PRINTHEAD
The modeler is initializing the Z-axis prior to building.
None.
HOMING X - Y
The modeler is initializing the X-axis and Y-axis prior to building.
None.
INSTALL
PLATFORM
The modeler cannot detect a platform.
Install a clean platform. Refer to
platform.
NOT BUILDING
The modeler is ready to build.
Press
to build or
to list menu options.
ONLINE
MENU
OK TO POWER
OFF
The modeler completed its internal shutdown procedure and is
ready to be shutdown.
Refer to modeler
Toggle power switch on modeler rear panel to the
OFF position.
NOTE
Before you switch power off, verify you will
not need to build parts again soon. It can
take several hours for the modeler to warm
up after you switch power back on.
ONLINE/MENU?
The modeler is ready to build.
Press
to build,
to list menu selections.
ONLINE
MENU
PAUSE
ACKNOWLEDGE
The
button was pressed. The modeler is acknowledging
PAUSE
and complying with the command.
None.
NOTE
If you press
during a print job, the
PAUSE
current layer or process is completed
before the pause takes effect.
PLEASE WAIT
The modeler is cooling to shutdown temperature.
Wait for the modeler to complete its shutdown
procedures. Refer to modeler
PRE-JOB
CHECKS
Briefly displayed during modeler build preparation.
None.
BUILDING
The modeler is currently building.
Allow the build job to continue or press
or
PAUSE
to stop building.
ABORT
RAISING
PLATFORM
The modeler is raising the printhead so you can remove the
platform.
None.
REMOVE BUILD
The modeler completed a build job and unlocked the chamber
door so you can remove the platform.
Remove the platform and replace it with a clean
platform. Refer to
of build platform.
SHUTDOWN IN
PROGRESS
You selected the
menu option, then pressed
SHUTDOWN
YES
twice. The modeler is cooling down so power can be switched
off. Refer to modeler
None. DO NOT switch off the modeler while
shutdown is in progress.
SHUTDOWN
COMPLETE
Modeler cooldown is complete; modeler is ready for power off.
Wait for
message, then switch
OK TO POWER OFF
power off at the modeler's rear panel.
NOTE:
Before you switch power off, verify you will
not need to build parts again soon. It can
take several hours for the modeler to warm
up after you switch power back on. Refer
to modeler
.
Содержание ProJet 5000
