3D Corporation ProJet 5000, Руководство пользователя

Страница: 66 / 94

1.
2.
3.
4.
5.
The build job submitted will be built when printer is ready unless:
It is , in which case press the button on the printer's panel. OFFLINE ONLINE
It does not have a clean build platform installed; install clean one and press . ONLINE
The Preparation Only option in the Submit dialog box was checked. This causes the modeler to wait until the build job was
confirmed before building --- enabling you to change the job in the Preview window again before confirming.
See "Checking printer Status" and " " in the online Help for more information. Confirming Build Jobs
When the Operator panel LCD shows , verify platform is clean and free of debris. If required, press and PLATFORM EMPTY? Y/N NO
remove build platform from the printer to replace. See 7.2 Install & Remove Material Bottles and Build Platform
Close chamber door and press . When the Operator panel LCD shows , press . If the display ONLINE PLATFORM EMPTY? Y/N YES
shows please Empty Waste Drawer, waste on the next build will exceed waste capacity, open the waste drawer and dispose of waste
material.
See 4.7 Waste Removal
Close waste drawer. The job starts automatically.
If the display shows *WAITING FOR JOB, no jobs are in the printer's queue. Go back to Step 2 and submit a build job to
the queue. Once in the queue, the job starts automatically.*
Refer to build jobs for additional information. Manage
8.3.1 Remove Build Platform
When operator panel display shows DONE: <job_name> remove build.