3Com Switch 5500 Family
Quick Reference Guide
snmp-agent usm-user
Use the
snmp-agent usm-user
command to add a new community name or, if you use the V3 parameter,
a new user to an SNMP group.
System view
snmp-host
Use the
snmp-host
command to configure the public SNMP host for members inside a cluster on the
management device.
Cluster view
source-policy
Use the
source-policy
command to filter the source (and group) address of multicast data packets.
PIM view
speed
Use the
speed
command to configure the transmission rate on the AUX (Console) port.
User Interface view
speed
Use the
speed
command to configure the port speed.
Ethernet Port view
spf-schedule-interval
Using the
spf-schedule-interval
command, you can configure the route calculation interval of OSPF.
OSPF view
ssh client assign rsa-key
Use the
ssh client assign rsa-key
command to specify on the client the public key for the server to be
connected to guarantee the client can be connected to a reliable server.
System view
ssh client first-time enable
Use the
ssh client first-time enable
command to configure the client to run the initial authentication.
System view
ssh server authentication-retries
Use the
ssh server authentication-retries
command to set authentication retry number for SSH
connections.
System view
ssh-server source-interface
Use the
ssh-server source-interface
command to specify source interface for the SSH server. If you
specify a nonexistent interface in the command, your configuration fails.
Use the
undo ssh-server source-interface
command to clear the source interface configuration. After
that, the source address in the packets sent to the SSH2 client is determined by the system.
System view
ssh server rekey-interval
Use the
ssh server rekey-interval
command to define update interval of server key pair.
System view
ssh-server source-ip
Use the
ssh-server source-ip
ip-addr
command to specify source IP address for the SSH server.
System view
ssh server timeout
Use the
ssh server timeout
command to set authentication timeout time for SSH connections.
System view
ssh user assign rsa-key
Use the
ssh user assign rsa-key
command to allocate public keys to SSH users.
System view
ssh user authentication-type
Use the
ssh user authentication-type
command to define on the server the available authentication type
for an SSH user.
System view
ssh user service-type
Use the
ssh user service-type
command to specify service type for a user.
System view
