3Com Switch 5500G-EI PWR 48-Port, Краткое руководство пользователя

Страница: 43 / 59

3Com Switch 5500 Family 43
Quick Reference Guide
qos cos-local-precedence-map
Use the
qos cos-local-precedence-map
command to configure “CoS Local-precedence” mapping table
System view
qos-profile
Use the
qos-profile
command to create a QoS profile and enter the corresponding view. For an existing
profile, you can directly enter the corresponding view.
System view
radius nas-ip
Use the
radius nas-ip
command to specify the source address of the RADIUS packet sent from NAS.
System view
radius-scheme
Use the
radius-scheme
command to configure the RADIUS scheme used by the current ISP domain.
ISP Domain view
radius scheme
Use the
radius scheme
command to configure a RADIUS scheme group and enter its view.
System view
reboot
Use the
reboot
command to restart an Ethernet switch.
User view
reboot member
Use the
reboot member
command to reset a specified member device on the management device.
Cluster view
region-name
Use the
region-name
command to assign an MST region name to a switch.
MST Region view
register-policy
Use the
register-policy
command to configure a RP to filter the register messages sent by the DR in the
PIM-SM network and to accept the specified messages only.
PIM view
remote-ping
Use the
remote-ping
command to specify remote-ping test class.
System view
remote-ping-agent enable
Use the
remote-ping-agent enable
command to enable remote-ping client.
System view
remote-probe vlan
Use the
remote-probe vlan enable
command to enable the remote-probe port mirroring on the VLAN of
a switch.
VLAN view
remotehelp
Use the
remotehelp
command to display help information about the FTP protocol command.
FTP Client view
remove
Use the
remove
command to delete the specified file from the server.
SFTP Client view
This command has the same function as the
delete
command.
rename
Use the
rename
command to change the name of the specified file on the SFTP server.
SFTP Client view
reset
Use the
reset
command to reset the system configuration parameters of RIP.
RIP view
reset acl counter
Use the
reset acl counters
command to reset the ACL statistics information to zero.
User view
reset arp
Use the
reset arp
command to remove information that is no longer required from the ARP mapping table.
User view