3Com Switch 5500 Family
9
Quick Reference Guide
default type
Use the
default type
command to configure the default type when OSPF redistributes external routes.
OSPF view
delete
Use the
delete
command to delete a specified file from the storage device of the switch.
User view
delete
Use the
delete
command to delete the specified file.
This command is used to delete a file.
FTP Client view
delete
Use the
delete
command to delete the specified file from the server.
SFTP Client view
delete-member
Use the
delete-member
command to remove a member from the cluster.
Cluster view
delete static-routes all
Use the
delete static-routes all
command to delete all the static routes.
System view
description
Use the
description
command to enter a description of an Ethernet port.
Use the
undo description
command to cancel the description.
Ethernet Port view
description
Use the
description
command to set a description for the current VLAN.
Use the
undo description
command to cancel the description of current VLAN.
VLAN view
destination-ip
Use the
destination-ip
command to configure the destination IP address of the test.
Remote-Ping Test Group view
detect-group
Use the
detect-group
command to create a detecting group and enter detecting group view.
System view
detect-list
Use the
detect-list
command to specify the IP address to be detected in the detecting group. This
command also specifies the order in which the IP addresses in a detecting group are detected.
Detecting Group view
dhcp enable
Use the
dhcp enable
command to enable DHCP.
System view
dhcp relay information enable
Use the
dhcp relay information enable
command to enable option 82 supporting on a DHCP relay,
through which you can enable the DHCP relay to insert option 82 into DHCP request packets sent to a
DHCP server.
System view
dhcp relay information strategy
Use the
dhcp relay information strategy
command to instruct a DHCP relay to perform specified
operations to DHCP request packets that carry option 82.
System view
dhcp select global
Use the
dhcp select global
command to configure the specified interface(s) or all interfaces to operate
in global DHCP address pool mode.
System view
VLAN Interface view
dhcp select interface
Use the
dhcp select interface
command to configure the specified interface(s) to operate in DHCP
interface address pool mode.
System view
VLAN Interface view
