3Com Switch 5500 Family
55
Quick Reference Guide
terminal monitor
Use the
terminal monitor
command to enable the log debugging/log/trap on the terminal monitor.
User view
terminal trapping
Use the
terminal trapping
command to enable terminal trap information display.
User view
test-enable
Use the
test-enable
command to execute the current remote-ping test.
Remote-Ping Test Group view
test-type
Use the
test-type
command to configure the type of the test.
Remote-Ping Test Group view
tftp cluster get
Use the
tftp cluster get
command to download a specified file from a cluster TFTP server.
User view
tftp cluster put
Use the
tftp put
command to upload a specified file to a specified directory of a cluster TFTP server.
User view
tftp get
Use the
tftp get
command to download a file from a TFTP server to this switch.
User view
tftp put
Use the
tftp put
command to upload a file from the switch to the specified directory on the TFTP server
and save it with a new name.
User view
tftp-server
Use the
tftp-server
command to configure the public TFTP server for cluster members on the
management device.
Cluster view
tftp source-interface
Use the
tftp source-interface interface
command to specify source interface for the TFTP client. If
you specify a nonexistent interface in the command, your configuration fails.
System view
tftp source-ip
Use the
tftp source-ip
command to specify source IP address for the TFTP client. If the
ip-addr
in the
command is not an address of the device, your configuration fails.
System view
tftp tftp-server source-interface
Use the
tftp tftp-server source-interface
command to use a specified source interface to establish
a connection with a TFTP server.
User view
tftp tftp-server source-ip
Use the
tftp tftp-server source-ip
command to use a specified source IP address to establish a
connection with a TFTP server.
User view
time-range
Use the
time-range
command to configure a time range.
System view
timeout
Use the
timeout
command to configure the timeout time of the test.
Remote-Ping Test Group view
timer
Use the
timer
command to set the interval of handshake packets.
Cluster view
timer loop
Use the
timer loop
command to set the detecting interval, that is, the frequency to perform auto detect.
Detecting Group view
