3Com Switch 5500 Family
23
Quick Reference Guide
display ssh-server source-ip
Use the
display ssh-server source-ip
command to display the source IP address of the SSH server. If
no source IP address is specified, 0.0.0.0 is displayed.
Any view
display ssh user-information
Use the
display ssh user-information
command to display information about the current SSH users,
including user name, authentication mode, key name and authorized service types. If the
username
is
specified, the command displays information about the specified user.
Any view
display ssh2 source-ip
Use the
display ssh2 source-ip
command to display the source IP address of the SSH2 client. If no
source IP address is specified, 0.0.0.0 is displayed.
Any view
display startup
Use the
display startup
command to display the information about the startup configuration files on one
switch or all switches in the fabric, including the names of the currently used, the to-be-used main and
backup startup configuration files.
Any view
display stop-accounting buffer
Use the
display stop-accounting-buffer
command to view information on the stop-accounting requests
buffered in the switch.
Any view
display stp
Use the
display stp
command to display the status and statistics of specified spanning trees, and hereby
analyze and maintain the topology of a network and to make MSTP operate properly.
Any view
display stp ignored-vlan
Use the
display stp ignored-vlan
command to view the list of STP-Ignored VLANs.
Any view
display stp region-configuration
Use the
display stp region-configuration
command to display the MST region configurations that are
effective, including the region name, region revision level, and spanning tree instance-to-VLAN mappings
configured for the switch.
Any view
display stp tc
Use the
display stp tc
command to display the number of topology changes and/or topology change
notifications that an active port has received.
Any view
display tcp statistics
Use the
display tcp statistics
command to view the statistics information about TCP packets.
Any view
display tcp status
Use the
display tcp status
command to view the TCP connection state.
Any view
display telnet-server source-ip
Use the
display telnet-server source-ip
command to display the source IP address of the Telnet
server. If no source IP address is specified, 0.0.0.0 is displayed.
Any view
display tftp source-ip
Use the
display tftp source-ip
command to display the source IP address of the TFTP client. If no
source IP address is specified, 0.0.0.0 is displayed.
Any view
display this
Use the
display this
command to display the running configurations in the current view of the system.
Any view
display time-range
Use the
display time-range
command to view the configuration and status of the current time range. You
will see the active or inactive state outputs respectively.
Any view
