3Com Switch 5500 Family
53
Quick Reference Guide
stp mcheck
Use the
stp mcheck
command to perform the mCheck operation for the current port.
Ethernet Port view
stp mode
Use the
stp mode
command to set the MSTP operation mode of the switch.
System view
stp pathcost-standard
Use the
stp pathcost-standard
command to set the standard for calculating the default path costs of the
links to which the switch is connected to.
System view
stp point-to-point
Use the
stp point-to-point
command to specify whether the port must connect to point-to-point link.
Ethernet Port view
stp port priority
Use the
stp port priority
command to set the priority of the current port in a specified spanning tree
instance.
Ethernet Port view
stp priority
Use the
stp priority
command to set the priority of a switch in a spanning tree instance.
System view
stp region-configuration
Use the
stp region-configuration
command to enter MST region view.
System view
stp root primary
Use the
stp root primary
command to configure the current switch to be the root bridge of a specified
spanning tree instance.
System view
stp root-protection
Use the
stp root-protection
command to enable the root protection function for the current port.
Ethernet Port view
stp root secondary
Use the
stp root secondary
command to configure the current switch to be a secondary root bridge of a
specified spanning tree instance.
System view
stp tc-protection
Use the
stp tc-protection
command to enable or disable the TC-BPDU attack prevention function for
the switch.
System view
stp timeout-factor
Use the
stp timeout-factor
command to configure the multiple of hello time for the Switch.
System view
stp timer-factor
Use the
stp timer-factor
command to set the timeout time of a switch in terms of the multiple of the Hello
time. For example, with the number argument set to 3, the timeout time is three times of the Hello time.
System view
stp timer forward-delay
Use the
stp timer forward-delay
command to set the Forward delay for a switch.
System view
stp timer hello
Use the
stp timer hello
command to set the Hello time for a switch.
System view
stp timer max-age
Use the
stp timer max-age
command to set the Max age for a switch.
System view
stp transmit-limit
Use the
stp transmit-limit
command to set the maximum number of BPDUs the current port can
transmit within a Hello time interval.
Ethernet Port view
