3Com Switch 5500 Family
5
Quick Reference Guide
boot boot-loader backup-attribute
Use the
boot boot-loader backup-attribute
command to assign the backup attribute to an App file on
one switch or all switches in the fabric, so as to use this App file as the backup boot file upon next startup
of switch.
User view
boot bootrom
Use the
boot bootrom
command to upgrade bootrom.
User view
boot web-package
Use the
boot web-package
command to assign the main or backup attribute to a Web file on the fabric, so
as to use this file as the main or backup Web file upon next startup.
User view
broadcast-suppression
Use the
broadcast-suppression
command to globally set the size of the broadcast traffic allowed to pass
through each Ethernet port.
System view
broadcast-suppression
Use
broadcast-suppression
to configure the amount of broadcast traffic that will be accepted on a port.
Ethernet Port view
bsr-policy
Use the
bsr-policy
command to limit the range of legal BSRs to prevent BSR spoofing.
PIM view
build
Use the
build
command to configure a cluster with the current switch as the management device. Argument
name specifies the name of the cluster.
Cluster view
bye
Use the
bye
command to terminate the connection to the remote SFTP server and return to system view.
SFTP Client view
cache-sa-enable
Use the
cache-sa-enable
command to enable the SA message cache mechanism.
MSDP view
c-bsr
Use the
c-bsr
to configure a candidate BSR.
PIM view
c-rp
Use the
c-rp
to configure the router to advertise itself as a candidate RP.
PIM view
cd
Use the
cd
command to change the current path on the remote SFTP server. If you did not specify the
remote-path
argument, the current path is displayed.
SFTP Client view
cdup
Use the
cdup
command to return to the upper directory.
SFTP Client view
change self-unit
Use the
change unit
command to change the unit ID of the current Switch.
System view
change unit-id
Use the
change unit-id
command to change the unit ID of a Switch in the Fabric.
System view
check region-configuration
Use the
check region-configuration
command to display the configurations of the MST regions that are
not activated, including region name, revision level, and VLAN mapping table.
MST Region view
checkzero
Use the
checkzero
command to check the zero field of RIP-1 packets. By default, RIP-1 performs zero field
checking.
RIP view
