61-1
61
Basic System Configuration and Debugging
Wh n configuring basic system c
e
onfiguration and debugging, go to these sections for information you
tion
are interested in:
z
Basic System Configura
Displaying the System Status
z
z
Debugging the System
Bas
Perform the f
ng basic
ic System Configuration
ollowi
system configuration:
To do…
Use the command…
Remarks
Set the current date
and time of the
in user view.
lt value is 23:55:00 04/01/2000 when
system
clock datetime
HH:MM:SS
{
YYYY/MM/DD |
MM/DD/YYYY
}
Required
Execute this command
The defau
the system starts up.
Set the local time
zone
ne
zone-name
{
add
|
minus
}
HH:MM:SS
his command in user view.
clock timezo
Optional
Execute t
By default, it is the UTC time zone.
Set the name and
time range of the
summer time
|
start-date end-time
end-date offset-time
Ex
z
z
nt time, so as to toggle
the summer time to normal system time.
clock summer-time
zone_name
{
one-off
repeating
}
start-time
Optional
ecute this command in user view.
When the system reaches the specified
start time, it automatically adds the
specified offset to the current time, so as to
toggle the system time to the summer time.
When the system reaches the specified end
time, it automatically subtracts the specified
offset from the curre
Enter system view
from user view
system-view
—
Set the system
name of the switch
sysname
sysname
Optional
By default, the name is
4500
.
Return from current
view to lower level
quit
nt view is user view, you will quit the
view
Optional
If the curre
current user interface.
Return from current
view to user view
return
The composite key <Ctrl+Z> has the same
effect with the
return
command.
Optional
