![background image](http://html1.mh-extra.com/html/3com/nbx-100/nbx-100_administrators-manual_440814174.webp)
174
C
HAPTER
3: D
EVICE
C
ONFIGURATION
Flash
Sends a special signal to the Call Processor to begin a call transfer.
On an NBX telephone, you cannot depress the switch hook to send a
Flash signal to the CO. You must use a button mapped to the Flash
function.
Number
— Not used.
Prty
(Priority) — Not used.
System
Intercom calls and outside calls from lines not mapped to specific
buttons ring on a System button. To call an outside number from a
System
line, you must access a line pool by dialing either 9 or 8,
depending on your line pool configuration.
By default, the bottom 3 buttons with lights have their
Type
set to
System.
Number
— Not used.
Prty
(Priority) — The button with the lowest value in the
Prty (
Priority
)
field is the one that becomes active when you lift the receiver or
press the Speaker button.
Table 26
Group Button Types (continued)
Group
Button Type Description
Содержание NBX 100
