![background image](http://html1.mh-extra.com/html/3com/nbx-100/nbx-100_administrators-manual_440814265.webp)
Configuring and Managing E1 Digital Line Cards
265
Verifying E1 Group Membership
To verify that all channels are in the member list:
1
Return to the
Digital Line Cards
tab (Figure 113).
2
In the
Select Device Type
list, select
ISDN PRI Group List
and click
Apply
.
3
Select the group that you want, and click
Membership
(Figure 96).
Figure 96
Manage Group Membership Dialog Box
4
Scroll through the
Member List
to verify that all 30 channels are present.
Completing the E1 Configuration
To complete the E1 configuration, perform these steps:
1
Return to the
Digital Line Cards
tab.
2
In the
Select Device Type
list, select
ISDN PRI Channel
List, click
Apply
.
3
Wait approximately 30 seconds for the status of each channel to change
from
Ready
to
Idle
. You can also watch the
Nominal
status light
on the E1
card front panel. When it stops flashing and stays on, the board is active.
If the channel status does not change to Idle, verify that you have enabled
the On Line check box for the card and the span.
While you are waiting, you can click
Apply
to refresh the list of channels
and to see the updated status.
Содержание NBX 100
