![background image](http://html1.mh-extra.com/html/3com/nbx-100/nbx-100_administrators-manual_440814305.webp)
Configuring and Managing T1 Digital Line Cards
305
5
To modify the name of the board, enter a new name in the Board Name
field. You can use alphanumeric characters, dashes, and underscores. The
maximum name length is 30 characters.
6
To change the type of card, in the
Card Type
field, select either
T1
(for T1
DS1 protocol) or
ISDN PRI
(for T1 ISDN PRI).
7
Click
OK
.
Modifying a T1 Span
To modify a span:
1
Return to the
Digital Line Cards
tab.
2
From the
Select Device Type
pull-down list, select either
T1 Span List
(for T1 DS1) or
ISDN PRI Span List
(for T1 ISDN PRI).
3
Click
Apply
.
4
Select the span you want to modify from the
Span List
.
5
Click
Modify
.
The dialog box that appears depends on which span list you select.
Figure 126 shows the T1 DS1 Modify Span dialog box.
Figure 127 shows the ISDN PRI Modify Span dialog box.
Figure 126
Modify Span Dialog Box — T1 DS1
Содержание NBX 100
