7-21
Memory Module Structure
Figure 7-33
Memory module structure
(1) Connector edge
(2) Polarization notch
(3) Latch notch
Memory Module Slot
Figure 7-34
Memory module slot
(1) Left release latch
(2) Memory module slot
(3) Right release latch
Removing a Memory Module
Follow these steps to remove a memory module:
Step1
Locate the card (MPU or LPU) to which you will install a memory module and put the card on a flat
worktable.
Step2
Pull the release latches away from the memory module at both ends so that the memory module is lifted
from the memory module slot.
Step3
Remove the memory module by holding its non-conductive edge.
