60
C
HAPTER
4: I
NSTALLING
AND
C
ONFIGURING
IN
N
ET
W
ARE
display status
This command displays information about all groups, or if a
primary slot parameter is specified, only about the specified
group. A separate message is displayed for each loaded
frame type. Board numbers are also displayed. Information
about the relationship between the board numbers and the
frame types is shown in the NetWare 5 Console Monitor.
On the Available Options screen, select LAN/WAN drivers
for this information.
Syntax
lbrsl group lb addr
RxIPAddr
pri_slot sec_slot
[
sec_slot
...]
lbrsl group rsl
pri_slot sec_slot
[
sec_slot
...]
where:
lb specifies a load balancing group.
rsl specifies a resilient server link group.
RxIPAddr is a dedicated IP address for the load balancing
group
pri_slot is the PCI slot number of the primary NIC.
sec_slot is the PCI slot number of a secondary NIC.
Example
lbrsl group lb addr 192.1.1.100 10001 10002
lbrsl group rsl 10001 10002
Default
None
Syntax
lbrsl display status [
pri_slot
]
where:
pri_slot is the PCI slot number of the primary NIC in the
group for which information is to be displayed. If this
parameter is not specified, information for all groups is
displayed. An example of the type of information
displayed follows:
Group NNN (LB group)
Primary board id: Original NNN, Current NNN
Load balancing on incoming IP packets: Enabled; IP Rx
Addr: NN.NN.NN.NN
Primary node address: XX:XX:XX:XX:XX:XX
Timeout values in seconds: send NNN, receive NNN,
wait NNN, link NNN
Probe Interval: NNN seconds
Slot number NNN (Active), Node Address:
XXX:XXX:XXX:XXX:XXX:XXX
Example
lbrsl display status 10001