58
C
HAPTER
4: I
NSTALLING
AND
C
ONFIGURING
IN
N
ET
W
ARE
2 Make the following changes to the AUTOEXEC.NCF
file:
a
Add or verify the LOAD commands for the LAN drivers
for all slot-frame instances.
b
In each group, load the same protocols and frame types
on the primary and all secondary NICs.
c
On the primary NIC only, bind a protocol to each
slot-frame instance.
d
Remove any BIND commands from each secondary NIC.
e
For each group, add an LBRSL GROUP command to bind
the primary and secondary NICs together. There can be
only one LBRSL GROUP command per group, and it
must list the primary and all secondary NICs. Place this
command after the LAN driver LOAD commands or the
SYS:ETC\INITSYS.NCF command. To specify a load
balancing group with resilient server links, use the LB
option. To specify a resilient server link group without
load balancing, use the RSL option.
For the LBRSL GROUP command syntax, see
Server
Feature Commands
.
3 Reboot the server.
The sample AUTOEXEC.NCF file in
Figure 6
shows one
group of three NICs and one group of two NICs. The
primary NIC in slot 10001 is bound to two secondary NICs
in slot 10002 and slot 10003. The primary NIC in slot
10004 is bound to the secondary NIC in slot 10005.
