![background image](http://html1.mh-extra.com/html/3com/etherlink-3c980c-txm/etherlink-3c980c-txm_user-manual_441315032.webp)
32
C
HAPTER
3: I
NSTALLING
AND
C
ONFIGURING
IN
W
INDOWS
11 Follow the installation prompts.
When the installation is finished, click
Finish
.
12 If you want to change SHD parameter settings,
follow these steps:
a
Right-click My Network Places and select
Properties
from the menu.
b
In the next window, right-click a connection and select
Properties
from the menu.
c
Click
Configure
.
d
In the NIC Properties window, click the Advanced tab.
e
In the Advanced window, you can configure the SHD
parameters. Select a parameter in the Property field and
change its value in the Value field. For parameter
descriptions, see
SHD Parameters (Windows) on
page 27
.
Configuring Groups and VLANs
Dynamic
Access
technology server features allow you to
configure load balancing groups and virtual LANs (VLANs).
The features are described in
Advanced Server Features on
page 10
.
The following Dynamic
Access
technology server features
are available for NIC groups in Windows:
■
load balancing
■
RSL failover
■
multiple VLANs
The examples in this section illustrate typical actions you
might take in the course of maintaining a Dynamic
Access
server configuration in Windows.
Planning the Configuration
Consider these items when planning groups and VLANs:
■
Decide whether you want to use bidirectional load
balancing, or transmit load balancing.
To use bidirectional load balancing, you must assign a
dedicated IP address for each load balancing group. This