![background image](http://html1.mh-extra.com/html/3com/etherlink-3c980c-txm/etherlink-3c980c-txm_user-manual_441315063.webp)
Maintaining Groups
63
wait timeout
This command sets the timeout value, in seconds, that the
software waits before marking a NIC that is in wait mode
as failed (see
retry count
). If no argument is specified or if
the specified argument is invalid, the current value is
displayed. Otherwise, the new value is displayed.
Troubleshooting a Group Configuration
Use the troubleshooting tips below to solve problems that
may occur in a group configuration.
Syntax
lbrsl wait timeout
seconds
where:
seconds is any positive integer.
Example
lbrsl wait timeout 2
Default
1
To access a database of technical information that can
help you diagnose and solve NIC installation,
configuration, and upgrade problems, go to:
http://knowledgebase.3com.com
Table 4
Troubleshooting Groups In NetWare
Symptom
Tip
More than one non-3Com server NIC
has been detected in one or more
groups on this server.
You can use only one NIC that is not a
3Com server NIC in one 3Com load
balancing/RSL group per server. Check
the groups and remove all but one of
the non-3Com server NICs from the
groups.