![background image](http://html1.mh-extra.com/html/3com/etherlink-3c980c-txm/etherlink-3c980c-txm_user-manual_441315035.webp)
Configuring Groups and VLANs
35
■
In the Load Balance/RSL window, you can create and
change Load Balancing/RSL groups. The NICs in a group
work together to route traffic efficiently and to recover
from failures.
■
In the VLANs window, you can set up virtual LANs. All
groups listed on the Load Balance/RSL window also
appear as groups in the VLAN window. Any ungrouped
NICs in the Load Balance/RSL window are also listed in
the VLAN window.
Windows NT
Start Dynamic
Access
server features under Windows NT as
follows:
1 Log in to the Windows NT Administrator account.
2 From the Windows Start menu, select
Settings/Control Panel.
3 Double-click the DynamicAccess SW Server icon.
The DynamicAccess Resilient Server Link/Load
Balance/VLAN Configuration window appears. Click
the appropriate tab to configure server features.
Windows 2000
Access Dynamic
Access
server features through the
Windows 2000 Network and Dial-up Connections window
as follows:
1 Log in to Windows 2000 with administrator
privileges.
2 Launch the Windows 2000 Network and Dial-up
Connections window.
3 Select a Local Area Connection icon.
4 Click the right mouse button and select Properties.
The Local Area Connections Properties window appears.
5 Click the General tab.
6 In the General window, select DynamicAccess
Protocol and click Properties.
The DynamicAccess Protocol Properties window appears.
Click the appropriate tab to configure server features.