3Com CoreBuilder 3500, Справочник по командам

Страница: 729 / 784

qos rsvp detail 729
✓
3500
✓
9000
9400
3900
9300
qos rsvp detail For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Displays detailed RSVP information when RSVP is enabled.
Valid Minimum Abbreviation
q r de
Important Consideration
■
If no flows are installed on the system or on a Layer 3 module, the
command displays only the summary information.
Options
Fields in the QoS RSVP Detail Display
Prompt Description Possible Values [Default]
Level of RSVP
information
(when flows
are installed) If RSVP flows are available to report,
the amount of RSVP information
you want
■
all
■
session
■
IP
–
Field Description
Excess loss eligible Whether excess packets are loss-eligible.
Excess service Service level for excess/policed traffic (
best
or
low
).
Per resv bandwidth Largest reservation that RSVP attempts to install.
Policing option When to drop excess packets. Edge policing causes excess
packets to be dropped only at the edge (that is, when the
traffic has not yet passed through any network device that has
already performed policing for that flow).
Session Session numbers, destination IP addresses and ports, protocols,
number of senders, receivers, and RSVP reservations.
Session – receiver
and session
reservation Port numbers, an RSVP style (
ST
) of fixed filter (
FF
), shared
explicit (
SE
), or wildcard filter (
WF
), next hop addresses, LIH
values, TTD values, bandwidth values, burst values, and filters.
Session – sender Port numbers, source IP addresses, previous hop addresses,
Logical Interface Handle (LIH) values, Time To Die (TTD) values,
bandwidth values, burst size values, and output ports.
Session –
installed flows Actual flow that was installed on the system (shown in the last
portion of the output).
Total resv
bandwidth Admission control policy. RSVP begins to refuse reservations
when the requested bandwidth on an output link exceeds the
total reservable bandwidth.