3Com CoreBuilder 3500, Справочник по командам

Страница: 207 / 784

ethernet detail 207
✓
3500
✓
9000
✓
9400
✓
3900
✓
9300
ethernet detail Displays detailed Ethernet port information including the information in
the summary and additional Ethernet port statistics, such as collision
counters.
Valid Minimum Abbreviation
e d
Important Considerations
■
Port numbering is consecutive, regardless of module type (if you are
using a system that has modules).
■
Depending on the system, numbering may or may not skip an empty
slot and continue with the ports that are associated with the next
occupied slot. (See the
Implementation Guide
for your system for
specific information about port numbering.)
■
Numbering includes unused ports.
■
Only one port number is assigned to a Gigabit Ethernet module in
switches that use Gigabit Ethernet modules.
■
The system no longer assigns port number
1
to the out-of-band
management port, which does not receive a port number.
■
The
rxFrames
value that the Ethernet detail command reports for a
bridge port may differ from the value that the bridge port detail
command reports. The Ethernet detail command counts
all
frames
that are delivered to the port while the bridge port detail command
reports only
valid
frames that are passed to the port. Therefore, the
Ethernet detail value should exceed the bridge port detail value by the
number of receive errors (
rxErrs
).
■
At some prompts, you can specify the
?
option to list Ethernet ports
and port numbers. The
?
option displays Selection, Port, and Port
Label columns. The Selection column and Port column contain the
same port numbers because they represent your physical ports.