3Com CoreBuilder 3500, Справочник по командам

Страница: 288 / 784

288 C
HAPTER
10: B
RIDGE
P
ORT
P
ARAMETERS
bridge port
✓
3500
✓
9000
✓
9400
✓
3900
✓
9300
multicastLimit
Sets a threshold value on a bridge port that affects the per-second
forwarding rate of multicast or broadcast traffic that originates on the
segment connected to that port.
Valid Minimum Abbreviation
b po m
Important Considerations
■
You can use this command to configure the same setting on multiple
ports simultaneously. When you specify multiple port numbers, the
system prompts you to choose the setting and then applies it to all of
the ports.
■
A value of zero indicates that no limit is configured.
■
If you want to configure a limit for a trunk, be sure to apply it to the
trunk’s anchor port (lowest-numbered port) only. However, be aware
that the limit that you specify applies separately to
each link
in the
trunk, even though you only enter it once — that is, it is not an
aggregate.
■
For a larger array of similar options in the CoreBuilder 3500 and 9000
Layer 3 modules, see the Quality of Service (QoS) chapter in this guide
(Chapter 22) and in the appropriate
Implementation Guide .
Options
Prompt Description Possible Values [Default]
Bridge ports Bridge ports for which
you want to set the
multicastLimit One or more valid bridge
port numbers –
Frame type
(3900, 9300,
9400, 9000 L2) Frame type to which
the limit shall apply
■
BcastOnly
(broadcasts only)
■
McastBcast
(multicasts and
broadcasts)
McastBcast
Multicast
threshold value Configurable
parameter that limits
the per-second receive
rate of specified traffic.
■
0 – 200 (K frames/sec)
(3500 and 9000 L3)
■
0 – 200000 (frames/sec)
(3900, 9300, 9400, and
9000 L2)
0