3Com CoreBuilder 3500, Справочник по командам

Страница: 269 / 784

bridge cos modify 269
3500
✓
9000
✓
9400
✓
3900
✓
9300
bridge cos modify For CoreBuilder 9000: Applies to Layer 2 switching modules only.
Changes how the eight priority values (0 – 7) are assigned to each of the
two hardware queues and changes the optional rate limit on queue 1
(the high priority queue).
Valid Minimum Abbreviation
b c m
Important Considerations
■
Because you cannot configure a rate limit for queue 2, the
Administration Console prompts you to enter a rate limit only if you
select queue 1.
■
When you assign priority values to a given queue, the system
automatically assigns the remaining priority values to the other queue.
■
If CoS is disabled, you can still modify the queue settings; however,
they do not affect traffic until CoS is enabled.
Options
Prompt Description Possible Values [Default]
Queue
index Number of the device
queue whose settings you
want to modify
■
1
■
2
■
? (for a list of
selectable
indexes)
–
Rate limit Throughput limit that
applies only to queue 1
and is expressed as a
percentage Whole numbers
from 1 – 100 100 (factory default),
or current value
Class of
service tags IEEE 802.1p priority values
that you want to assign to
the selected queue. Use
commas to separate
multiple values.
■
0 – 7
■
all
■
? (for a list of
possible values)
For queue 1, values
4, 5, 6, 7 (factory
default), or current
values
For queue 2, values
0, 1, 2, 3 (factory
default), or current
values