3Com 7750 Series, Справочник по командам

Страница: 672 / 1177

3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-51
Parameter
minutes : Real-time accounting interval. It ranges from 3 minutes to 60 minutes and
must be a multiple of 3. By default, this interval is 12 minutes.
Description
Use the timer realtime-accounting command to set the real-time accounting interval.
Use the undo timer realtime-accounting command to restore the default real-time
accounting interval.
Note that:
z
To charge the users in real time, you should set the interval of real-time accounting.
After the setting, the NAS sends the accounting information of online users to the
RADIUS server at regular intervals.
z
The setting of the real-time accounting interval depends to some degree on the
performance of the NAS and the RADIUS server. The higher the performance of
the NAS and the RADIUS server is, the shorter the interval can be. You are
recommended to set the interval as long as possible when the number of users is
relatively great (
ƒ
1000). Table 1-5 lists the numbers of users and the
corresponding recommended intervals.
Table 1-5 Numbers of users and corresponding recommended intervals
Number of users Real-time accounting interval
1 to 99 3
100 to 499 6
500 to 999 12
ƒ
1000
ƒ
15
Related command: retry realtime-accounting and radius scheme .
Example
# Set the real-time accounting interval of the RADIUS scheme radius1 to 51 minutes.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] radius scheme radius1
[3Com-radius-radius1] timer realtime-accounting 51
1.2.28 timer response-timeout
Syntax
timer response-timeout seconds