3Com 7750 Series, Справочник по командам

Страница: 398 / 1177

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Chapter 3 OSPF Configuration Commands
3-55
specify the no-summary argument in the stub command to disable the receiving of
type-3 LSAs by the stub area connected to the ABR.
Related command: default-cost .
Example
# Set the type of OSPF area 1 to STUB.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] ospf 1
[3Com-ospf-1] area 1
[3Com-ospf-1-area-0.0.0.1] stub
3.1.51 vlink-peer
Syntax
vlink-peer router-id [ hello seconds | retransmit seconds | trans-delay seconds |
dead seconds | simple password | md5 keyid key ]*
undo vlink-peer router-id
View
OSPF Area view
Parameter
route-id : Router ID of virtual link peer.
hello seconds : Specifies the interval, in seconds, at which the router transmits hello
packet. It ranges from 1 to 8192 and defaults to 10. This value must equal the hello
seconds value of the router virtually linked to the interface.
retransmit seconds: Specifies the interval, in seconds, for retransmitting the LSA
packets on an interface. It ranges from 1 to 8192 and defaults to 5.
trans-delay seconds: Specifies the delay, in seconds, for transmitting LSA packets on
an interface. It ranges from 1 to 8192 and defaults to 1.
dead seconds : Specifies the interval, in seconds, of death timer. It ranges from 1 to
8192 and defaults to 40. This value must equal the dead seconds of the router
virtually linked to it and must be at least four times of the hello seconds .
simple password: Specifies the simple text authentication password, which contains
up to eight characters, of the interface. This value must equal the authentication key
of the virtually linked peer.
keyid: MD5 authentication key ID. It ranges from 1 to 255. It must be equal to the
authentication key ID of the virtually linked peer.