3Com 7750 Series, Справочник по командам

Страница: 314 / 1177

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Chapter 1 Static Route Configuration Commands
1-10
View
Any view
Parameter
protocol : You can provide one of the following values for this argument.
z
direct : Displays direct-connect route information
z
static : Displays static route information.
z
bgp : Displays BGP route information
z
isis : Displays IS-IS route information.
z
ospf : Displays OSPF route information.
z
ospf-ase : Displays OSPF ASE route information.
z
ospf-nssa : Displays OSPF NSSA route information.
z
rip : Displays RIP route information.
inactive : With this argument provided, this command displays the inactive route
information. Without this argument provided, this command displays both active and
inactive route information.
verbose : With this argument provided, this command displays the verbose route
information. Without this argument provided, this command displays route summary
only.
Description
Use the display ip routing-table protocol command to display the route information
of a specific protocol.
Example
# Display the summary of all direct-connect routes.
<3Com> display ip routing-table protocol direct
DIRECT Routing tables:
Summary count: 8
DIRECT Routing table status:<active>:
Summary count: 7
Destination/Mask Protocol Pre Cost Nexthop Interface
10.5.1.0/24 DIRECT 0 0 10.5.1.5 Vlan-interface105
10.5.1.5/32 DIRECT 0 0 127.0.0.1 InLoopBack0
100.100.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
102.1.1.0/24 DIRECT 0 0 102.1.1.1 LoopBack1
102.1.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
127.0.0.0/8 DIRECT 0 0 127.0.0.1 InLoopBack0
127.0.0.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
DIRECT Routing table status:<inactive>: