3Com 5500 SI - Switch - Stackable, Руководство по настройке

Страница: 142 / 686

142 C
HAPTER
10: DHCP S
ERVER
C
ONFIGURATION
Configuring the option 184 supporting function in global DHCP address pool
view
Perform the operations listed in Table 131 if you specify to assign IP addresses of a
global DHCP address pool to DHCP clients.
Configuration Example Network requirements
A 3COM VCX device operating as a DHCP client requests the DHCP server for all
sub-options of option 184. A S5500 series switch operates as the DHCP server. The
option 184 supporting function is configured for a global DHCP address pool. The
sub-options of option 184 are as follows:
■
NCP-IP: 3.3.3.3
■
AS-IP: 2.2.2.2
■
Voice VLAN: enabled
■
Voice VLAN ID: 1
■
Fail-over routing IP: 1.1.1.1
■
Dialer string: 99*
Table 131 Configure the option 184 supporting function in global DHCP address pool view
Operation Command Description
Enter system view system-view -
Configure the interface to
operate in DHCP server mode
and assign the IP addresses of
an interface-based address
pool to DHCP clients dhcp select global [
subaddress ] { all |
interface
interface-type
interface-number
[
to interface-type
interface-number ] }
Required
Enter DHCP address pool view dhcp server ip pool
pool-name
-
Configure an IP address range
IP addresses in which are
dynamically assigned network ip-address
[ mask netmask ]
-
Configure the NCP-IP
sub-option voice-config ncp-ip
ip-address Required
Configure the AS-IP
sub-option voice-config as-ip
ip-address Optional
You can configure this sub-option only after
you configure the NCP-IP sub-option.
Configure the voice VLAN
configuration sub-option voice-config
voice-vlan vlan-id {
enable | disable } Optional
You can configure this sub-option only after
you configure the NCP-IP sub-option.
Configure the Fail-over
routing sub-option voice-config fail-over
ip-address
dialer-string Optional
You can configure this sub-option only after
you configure the NCP-IP sub-option.