3Com 5500 SI - Switch - Stackable, Руководство по настройке

Страница: 103 / 686

Voice VLAN Configuration 103
Enabling/Disabling Voice VLAN Features
Enable/disable the Voice VLAN in System View.
The VLAN must already exist before you can enable Voice VLAN features. You cannot
delete a specified VLAN that has enabled Voice VLAN features and only one VLAN can
enable Voice VLAN at one time.
Enabling/Disabling Voice VLAN Features on a Port
Perform the following configuration in Ethernet Port View.
Only when the Voice VLAN features in System View and Port View are all enabled can
the Voice VLAN function on the port run normally.
Setting/Removing the OUI Address Learned by Voice VLAN
Configure OUI addresses which can be learned by Voice VLAN using the following
command; otherwise the system uses the default OUI addresses as the standard of IP
Phone traffic.
The OUI address system can learn 16 MAC addresses at most. Adding the OUI
addresses, you need only input the first three-byte values of the MAC address.
Perform the following configuration in System View.
There are four default OUI addresses after the system starts.
Table 89 Configuring Voice VLAN Features
Operation Command
Enable Voice VLAN features
voice vlan vlan_id enable
Disable Voice VLAN features
undo voice vlan enable
Table 90 Configuring Voice VLAN Features on a Port
Operation Command
Enable the Voice VLAN features on a port
voice vlan enable
Disable the Voice VLAN features on a port
undo voice vlan enable
Table 91 Configuring the OUI address Learned by Voice VLAN
Operation command
Set the OUI address
learned by Voice VLAN
voice vlan mac_address oui mask oui_mask
[
description
string
]
Remove the OUI
address learned by
Voice VLAN
undo voice vlan mac_address oui
Table 92 Default OUI Addresses
No. OUI Description
1 00:E0:BB 3Com phone
2 00:03:6B Cisco phone
3 00:E0:75 Polycom phone
4 00:D0:1E Pingtel phone