PTZ position co-ordinated are also shown, use the refresh button to refresh the data if the camera has been moved.
PTZ position co-ordinated can also be added manually, use the go button to send the camera to the co-ordinated
set.
Pan!Tilt Offset
Used to set current pan/tilt to zero.
OK to program the new settings into the Predator.
Cancel to abandon the changed to the advanced feature settings.
3
4 Camera
•
,-,.
360Vi,ionTf:chnologylimited
)(
• Camera -cannot be edited, shows label/name given to the camera.
(See section Video - Camera page
6
0)
The Camera page, offers options to:-
•
Digital Zoom -Enable digital zoom. Default is off.
•
White Balance -Select White Balance settings to suit camera location.
(See page
77
for table of options)
•
Wide dynamic range -Enable SBR, Options available are ON, Auto and off. Default is Auto.
•
Zoom Speed - Select zoom speed of the lens. Options are slow, medium, high and highest.
•
Proportional Zoom -Automatically reduces/Increases pan/tilt speed depending zoom ratio. Default is
on.
•
Freeze Preset -This option freezes the image, when moving between preset. This can help reduce the
bandwidth. Default is on.
•
Day Aperture - Can be used to increase the picture detail. Default is 10.
•
Sensor Frame Rate -Can be used to set the camera to suit 25 fps (PAL) or 30 fps (NTSC). Unit must
be rebooted for settings to apply. Default is PAL.
•
Auto Focus/Iris on PTZ -Auto focus / iris will activate when PTZ is used, can be switched off. Default is
on.
•
Fast Shutter- Select fast shutter if using the Predator camera on an ANPR system. Default is off.
(See
page
77
for table of options)
•
Set - Set current position to zero
•
C
lear -
C
lear current zero position.
Predator Radar Installation Manual_V8_1_28_00
Page 65 of 78
© 360 Vision Technology Ltd
