39
Maintenance
• Camera - Cannot be edited, shows label/name given to the camera.
(See Video - Camera - page 60)
Version
•
Firmware - Current firmware loaded onto the camera.
Kernel - Current kernel file loaded onto the camera.
Bootloader - Current Bootloader loaded onto the camera.
•
Hardware - Current mainboard software loaded onto the camera.
Parameters and Settings
•
Backup Settings - Save - Used to save the camera settings.
The file is displayed as lnvictus_HD_ YYYYMMDD_HHMM.DAT clicking on this file will download the
file to the PC download folder.
Restore Settings - Browse to the required DAT file and then click restore. The camera will then
apply the settings and reboot the camera.
PLEASE NOTE:- All saved camera settings including passwords will be uploaded to the camera.
Validate Settings - Used to validate the uploaded settings, after the camera reboot process.
•
Reset Settings
Default Parameters - Reset codec parameters i.e. video stream settings.
Factory reset - This will reboot the camera and all the settings, except IP address will be lost.
Camera Maintenance
• Camera reboot
Soft reset - This will reboot the codec, no settings will be lost.
Hard reset - This will reboot the camera, no settings will be
Firmware Update - Browse to codec file and then click on update. The camera codec will
then be updated. The lnvictus camera will re-boot once the update has been performed.
DO NOT
interfere with this process as it may stop the camera from working.
Visit the camera Browser page (Framework), 360 Vision Technology web site or contact 360 Vision
Technical Support for the link to the update application & codec update files.
Predator Radar Installation Manual_V8_1_28_00
Page 72 of 78
© 360 Vision Technology Ltd
