Predator-Dualview Installation Manual V2.1.21.1
Page 54
© 360 Vision Technology Ltd.
12 Special Presets
Illumination
(when it is dark)
Seek 64
(On)
IR
(mono/colour not changed)
Seek 66
(Off)
Seek 65
(On)
White Lights
(mono/colour not changed, no timer)
Seek 66
(Off)
Night Sensor
(when it is dark)
Seek 67
(Mono)
Seek 68
(Colour)
Night Focus Range
(when it is dark)
Seek 69
(Ambient)
Seek 70
(IR)
White Lights
(when it is dark)
Seek 100
(On)
White Lights
(change to colour, timer used)
Seek 101
(Off)
13 Network Settings Recovery
When network settings are changed, the IP address, Net Mask and Gateway are validated before they are
saved. However if the settings are such that the Affiniti HD has settings which mean that it cannot be seen on
the user’s network, it may become necessary to use the ‘Network Settings Recovery’ feature as described
below.
The ‘Network Settings Recovery’ IP address may conflict with an IP address that is already defined on the
network, it may be necessary to disconnect the Affiniti HD from the network and control it locally using a
network connection to a laptop so that the IP address can be set to a suitable setting before the Affiniti HD is
reconnected to the main network.
Procedure for ‘Network Settings Recovery’
Disconnect the Affiniti HD from the network.
Turn power to the Affiniti HD OFF for 3 seconds.
Turn power to the Affiniti HD ON for 4 seconds.
Repeat the above three times.
On the final power ON, leave the power switched on for at least 5 minutes to allow the Affiniti HD to initialise.
(See section Locating the Affiniti HD on your network -
page 36).
