Predator-Dualview Installation Manual V2.1.21.1
Page 50
© 360 Vision Technology Ltd.
Force Onvif Version Configuration
• Reported Version - Can be used to change the Onvif version reported by the camera to the VMS,
options are:- Default - Onvif 2.40, V2.02, V2.20 & V2.40. Ok setting and then re-boot camera from
web page to apply.
•
Preset Token Format - Default (Used on certain VMS servers. Uses mix of text and ‘P’ zero-pad
number as preset tokens). Number only (Used on certain VMS servers. Uses numbers as preset
tokens). ‘P’ zero-pad number (Used on certain VMS servers. Uses P001 to P360 as preset tokens).
• Authorisation Elevation - Used on Vicon VMS, allows the anonymous user to set as admin, viewer or
operator.
• Pan/Tilt position Range -
Feature not available.
• Advertise Multicast - Switch on to advertise the camera supports multicast via onvif. Camera does not
support multicast and unicast on the same video stream.
• Auxiliary Functions - Used to set how the VMS will see the Onvif Auxiliary Token.
Configurable - Aux 1 - 8, configurable via web page
Standard - Standard Onvif
Additional - Additional control commands using the Onvif Standard
OK
to apply the new settings into the Affiniti-HD.
Cancel
to abandon the changes to the interface settings.
11.3 Add/Edit Users
The Add/Edit Users page, allows the admin user to create both operator and viewer level login details. The
admin user login password, can also be changed here. The web page admin password is also the Onvif admin
password. Care must be taken, when changing the admin password.
There is no way of recovering the Affiniti-HD admin password if forgotten.
!
