Predator-Dualview Installation Manual V2.1.21.1
Page 46
© 360 Vision Technology Ltd.
Night Settings
• Night Changeover - Night Changeover settings can be changed to suit the site requirements. Options
are dark, medium, light and custom. Default is dark.
This sets when the camera goes into ‘dark
mode’.
• Custom On Level - Range is 7 to 25. A lower value will set the level on when the scene is brighter, a
higher value will set the level on when the scene is darker. Default is 7.
•
Custom Off Level - Range is 1 to 20. A lower value will set the level off when the scene is brighter, a
higher value will set the level off when the scene is darker. Default is 1.
•
Night Brightness - This controls the exposure compensation, by artificially brightening the image.
Options are normal and auto. Default is normal.
• Night Illumination - Choose which type of light source is required for when the camera is in dark
mode. Options are IR or white light if supported by the camera.
• Night Sensor - Can be set to colour or mono. Default is mono.
• Night Focus Range - Sets how the camera will focus (when in mono) to suit the light source in the
scene. If this is set incorrectly the image may not be in focus.
• Night Aperture - Can be used to increase the picture detail. Default is 3.
• Night Noise Reduction - Used to reduce noise with scenes of low illumination. NR must be set to suit
the environment. Default is 1.
•
Night Presets - This can be used to set the presets to different settings if required. Default is on.
(See Advanced Features - page 43).
• Dim Lights Angle - Feature not available.
• Dim Lights Intensity - Feature not available.
• Night HLC Level - Feature not available.
• Night HLC Mask - Feature not available.
Configuration
• Sun Shield - Feature not available.
• Auto Flip - Feature not available.
• Attack Detect - Feature not available.
•
Upright Mount - Can be used to flip the image, so the camera can be used on a pole or a ceiling.
Default is pole.
• Status Refresh Rate - Can be used to help speed up telemetry control of the camera, by slowing
down the refresh rate.
OK
to program the new settings into the Affiniti-HD.
Cancel
to abandon the changes to the camera settings.
