Predator-Dualview Installation Manual V2.1.21.1
Page 26
© 360 Vision Technology Ltd.
7.2.7 Network
• Camera - Cannot be edited, shows label/name given to the camera.
(See Video - Camera - page 17).
Network
The Network tab, offers options to:-
• DHCP Enable - Allows the camera to be set using a dynamic IP address.
• IP Address - Input a static IP address, if DHCP is not used.
• Netmask - Input the Network Subnet Mask.
• Default Gateway - Input the Network Gateway.
• Primary Name Server - Input the Domain name server, if required.
• MTU Size - Option to change the MTU size, default is 1500 bytes.
NTP
•
NTP Server - Input the address of the time server required, default is pool.ntp.org.
MAC
•
MAC Address - Displays the camera MAC address.
RTSP -
(See Stream Tables - page 56).
Tick the box to enable ‘multicast’. If the box is not ticked then ‘unicast’ is selected.
• Multicast Stream 1 - Set IP address, port and TTL for stream 1.
• Multicast Stream 2 - Set IP address, port and TTL for stream 2.
(See Video - Stream Type - page 56).
RTSP protocols allow ‘multicast’ or ‘unicast’ transmission. In addition to the ‘multicast’ feature being available on
the Predator-DV, the ‘multicast’ feature must also be available on the receiving device.
Unicast
If lots of receivers (users) want to receive video streams from the Predator-DV, each receiver will have a
separate video stream. This would increase the network bandwidth used. E.g. five users would require five
video streams, that typically will require five times the bandwidth.
