2N SmartCom, Руководство пользователя

Страница: 34 / 141

34
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Port 1 (RS 232) SC Commands
These commands are used for setting the RS 232 parameters.
at^scport1="baudrate",9600
Enter the command to set the baud rate to 9,600 bps.
at^scport1="baudrate",115200
Enter the command to set the baud rate to 115,200 bps.
at^scport1="baudrate",230400
Enter the command to set the baud rate to 230 400bps.
The baud rate can be set to 110 – 230,400 in standard steps.
at^scport1="data_bits",8
Enter the command to set the data bits to 8. Setting options: 5-8.
at^scport1="stop_bits",2
Enter the command to set the stop bits to 2. Setting options: 1-2.
at^scport1="parity",2
Enter the command to set the parity check type. Setting options: 0-4.
0 – none
1 – even
2 – odd
3 – constant 1
4 - constant 0
at^scport1="flowcontrol",1
Enter the command to set the flow control type. Setting options 0-1.
0 - no flow control
1 - hardware flow control
at^scport1="save"
Enter the command to save the changes.
at^scport1="restart"
Enter the command to restart the port.
at^scport1="srestart"