2N LTE Verso, Руководство по настройке

Страница: 116 / 224

2N® LTE Verso Configuration Manual
116 / 224
•
•
•
•
•
selected voice message is played in both the automatic and manual call answering modes.
If this value is 0, the voice message is played instantaneously. Shared by all the SIP
accounts.
Answer Incoming Call by Button – pick up an incoming call via a selected speed dial
button. Set to None to disable the function.
Connecting Time Limit – set the maximum outgoing call connection timeout after which
the calls are automatically terminated. If the calls are routed to the GSM network via GSM
gateways, you are advised to set a value higher than 20 s.
Ring Time Limit – set the outgoing call setup and ringing time limit after which the calls
shall be automatically terminated. If the calls are routed to the GSM network via GSM
gateways, your are advised to set a value higher than 20 s. Minimum value 1 s, maximum
value 600 s. Configure 0 to disable this time limit.
Dial Cycles Limit – set the maximum count of user deputy dial cycles if the user dialled by
the Phone Book position number is inaccessible. The function helps you avoid deadlock if
the User Deputy is set to the same value in the Phone Book. Refer to Subs. 5.4.1.1 Limit
volacích cykl ů for calling cycle limit settins options.
Button Function During Outgoing Call – set the quick dial button function during an
outgoing call. You can only set the button that initiated the call.