2N LTE Verso Скачать руководство пользователя страница 206

Страница: 206 / 224

2N® LTE Verso Configuration Manual

206

224

•
•

•

Last Update At

– last update time.

Update Result

– last update result. The following options are available: DHCP option 66

failed, Firmware is up to date, Server connection failed, Running..., File not found.

Communication Result Detail

– server communication error code or TFTP/HTTP status

code.

Result

Description

Invalid server
address

The server address is invalid.

Unsupported
protocol

The protocol is not supported. HTTP(s) and TFTP are supported only.

Invalid file path

The provisioning file location is invalid.

DHCP option 66
failed

The server address loading via DHCP Option 66 or 150 has failed.

Invalid domain
name

The server domain name is invalid due to wrong configuration or
unavailability of the DNS server.

Server not found

The requested HTTP/TFTP server fails to reply.

Authentication
failed

The HTTP credentials are invalid.

File not found

The file has not been found on the server.

Request waiting in
queue...

The provisioning request is queuing...

In progress...

Update is in progress.

File is invalid

The file to be downloaded is corrupted or of a wrong type.

Firmware is up to
date

The firmware update attempt reveals that the latest firmware version
has been loaded.

Update
Succeeded

The configuration/firmware update has been successful. With firmware
update, the device will be restarted in a few seconds.

Internal error

An unspecified error occurred during file download.

Содержание LTE Verso

































































































































































































































Результаты поиска

Содержание LTE Verso

Отзывы:

Бренды по названию

Популярные бренды

2N LTE Verso, Руководство по настройке

Результаты поиска

Содержание LTE Verso

Отзывы:

Бренды по названию

Популярные бренды