2N LTE Verso, Руководство по настройке

Страница: 137 / 224

2N® LTE Verso Configuration Manual
137 / 224
•
•
•
•
•
•
Hard – the user is not allowed to use the access card or another identifier to re-enter
an area without leaving it before. A new UserAuthenticated record with
apbBroken= true will be created in the Status / Events section.
Time Limitation – select an Anti-Passback timeout during which the user cannot re-enter
an area using the given authentication method (card, code, etc.) in the same direction.
PICard
The 2 N
®
PICard technology is used for encryption of access card login data. To read the login
data, the 2N devices need access to the keys generated by the 2N
®
PICard Commander
application. The keys can subsequently be imported to 2N
®
Access Commander for distribution
to all of the supported 2N devices.
Description – encryption key name.
Hash – project numerical ID.
Upload PICard Keys – select the key file and enter the valid password to upload the
PICard key.
Delete PICard Keys – delete the uploaded PICard keys.
WaveKey
The 2N IP intercoms equipped with the Bluetooth module allow for user authentication via the
2N
®
Mobile Key application available to devices with iOS 12 and higher (iPhone 4s and higher
phones) or Android 6.0 Marshmallow and higher (Bluetooth 4.0 Smart supporting phones).
User Identification (Auth ID)
The 2N
®
Mobile Key application authenticates itself with a unique identifier on the intercom
side: Auth ID (128-bit number) is generated randomly for every user and paired with the
intercom user and its mobile device.
•
Note
The generated Auth ID cannot be saved in more mobile devices than one. This
means that Auth ID uniquely identifies just one mobile device or its user.
